产品简介
GDGZ1803 Cable Fault Locator cable capable of high impedance fault flashover or leakage fault location, the level of resistive grounding, short circuit and cable breakage, poor contact failure test. Suitable for high voltage cable, especially buried cable, and Wuhan Guo Ding Technology Co., Ltd. of high voltage power supply used in combination with advanced magnetic sound waveform display (see below), to see that from the point of failure in the test personnel there are more far (see below)! Pinpoint the fault point. Effect is very good, the instrument is simple to operate, easy to carry and transport. The company also provides technical services to find the point of failure site.
GDGZ-1803 cable fault locator has the following features:
1. sound, and magnetic synchronous receiver, anti-interference ability.
2. acousto-magnetic signal waveform display, easy to distinguish signal and noise.
3. Cursor measurements acousto-magnetic delay, to accurately determine the distance of the point of failure.
4. According to the initial polarity of the magnetic field waveforms simultaneously at fixed path detection.
5. The high-performance anti-noise headphone monitoring.
6. Large LCD display, user-friendly, easy to use.
7. Built-in high-capacity lithium-ion battery with rapid charger.
8. Power Management: According to different function on different power paths to minimize power consumption; if 15 minutes without any operation, the instrument will automatically shut down; when the battery voltage will automatically shut down to protect the battery.
9. The high degree of protection, small and portable.
10, with a magnetic sound synchronization
11, listen to the sound with a discharge function
12, to listen to the same sound over-discharge buried cable PathFinder

GDGZ-1803 cable fault locator test interface map: