GDDL-2801 capacitance and inductance tester|武汉国鼎科技有限公司

New Image Set

Move

Navigate

Hide Thumbs

First

Previous

Pause

Next

Last

Set Speed

GDDL-2801 capacitance and inductance tester

用途：GDDL-2801 capacitance and inductance tester compensate for reactive power, capacitor combination, a set formula does not compensate for measuring stitches, reduce labor intensity and improve work efficiency. Output current, voltage is large, prone to
参考标准：

· Compensate for reactive power, capacitor combiner, capacitance and inductance measurements stitches is not set
· Output current, power the instrument has measured workload is small, fast and simple, stable performance, accurate measurement, fault detection rate
· Measuring the reactor inductance

产品选型方案

简介
参数
附件
用户评价
产品证书
资料下载

产品简介

Advantages compared with the conventional measurement
Traditional measurement	Capacitance and inductance tester
Field measurement capacitor cable to be removed, not only easy to damage the heavy workload and the capacitor, the working efficiency is not high.	GDDL-2801 field measurement capacitance and inductance tester no stitches, measurable capacity per individual or a single set of capacitors.
Low capacitance meter output voltage caused by failure detection rate, and capacitance meter during the measurement process is likely to be reactive to compensate for the possibility of burnout.	The instrument has a measurement workload is small, fast and simple, stable performance, accurate measurement, fault detection rate and other characteristics; the device output 25V / 500VA power signal.
Traditional measurement requires two devices, namely capacitance and inductance table table, do not carry on.	Capacitance and inductance tester can measure the scene reactor inductance.
	Clamp meter can be used alone, it can be used to measure current.

产品参数

name	Measuring capacitance / inductance range	Measuring capacity / resistance range	measurement accuracy	Measurement resolution
Capacitance measurement	0. 1μF ～ 10mF	5 ～ 20,000kvar	±（读数×1%+0.01μF）	0.001（4Digit display）
Inductance measurement	0.1mH～50H	50mΩ~20KΩ	±(1.0% 读数+0.01mH)	0.001（4Digit display）
Current measurement	0～1000A;		±(1.0%读数+0.05A)	0.01A

NOTE: capacitance and inductance tester points single-phase and three-phase according to user requirements to develop.

产品附件
GDDL-2801 capacitance and inductance tester standard configuration:
1, GDDL-2801 capacitance and inductance tester host one
2, GDDL-2801 capacitance and inductance tester a clamp meter
3, a test line

用户评价

产品证书

资料下载