简介

Transformer winding DC resistance measurement is overhauled, followed by nonexcited switching converter tap, short circuit through the outlet 1 to 3 years will once again project. By direct resistance measurement, you can check out the quality of the welding wire or connection between the winding Haveturn short circuit or open circuit, and tap the contact is good and so on. Before direct resistance measurements are used to measure QJ44 double bridge, the bridge and the measurement of such currents is mA level measurement it takes a long time, but the accuracy is lower, for a limited Wuhan Guo Ding Technology the company developed a new type of direct resistance meter a transformer DC resistance tester ------ GDBY6803 DC resistance tester is suitable for measurement of transformer winding, transformers, motors and other inductive winding DC resistance of the sample, but also as a switch contact resistance, cable resistance and general resistance measurement tools, measurement of largecapacity threephase transformer winding DC resistance and optimize the design can be threephase transformer winding DC resistance test carried out at the same time, the DC resistance tester can be ACand DC dualuse. For the wild without AC power, is particularly applicabl

参数

GDBY-6803 DC resistance tester technical parameters:
Test current Simplex :
3mA  10mA  100mA   500mA   1A  5A  10A  20A  50A  100A
Three Phase :3mA  10mA  100mA   500mA   1A  5A  10A  20A  50A  100A
Measuring range Simplex
 
1A   10mΩ ~ 20Ω
5A   1mΩ  ~ 4Ω
10A   1mΩ  ~ 2Ω
20A   0Ω  ~ 8Ω
50A  1mΩ~4Ω
100A  1mΩ~4Ω
500mA:100mΩ~20Ω
100mA:500mΩ~100Ω
10mA: 2Ω~1kΩ
3mA:  100Ω~20kΩ
Three Phase  1A   10mΩ ~ 6Ω  (每相)
5A   1mΩ  ~ 1Ω  (每相)
10A   1mΩ  ~ 0.6Ω(每相)
20A   0Ω  ~ 8Ω
50A  0Ω~4Ω
100A  0Ω~4Ω
500mA:100mΩ~20Ω
100mA:500mΩ~100Ω
10mA: 2Ω~1kΩ
3mA:  100Ω~20kΩ
Measurement Accuracy ±(0.1%Reading +2words)
Maximum resolution 0.1μΩ
Data storage 150group
power supply AC 220V±22V,50Hz±2 Hz
working environment Ambient temperature: 0 ° ~ 40 ° Relative humidity: ≤80%
Note: single-phase or three-phase according to the requirements of the development of language.
 

附件

产品证书

用途

GDBY-6803 DC resistance tester for measuring large-capacity three-phase transformer winding DC resistance and optimize the design can be three-phase transformer winding DC resistance test performed simultaneously. On-load tap changer may not need to

资料下载

用户评价

首页
热线电话
在线咨询
解决方案